Product Description
Heat Activated Adhesive NEL-9050
NEL-9050 is type of low melting point hot melt adhesive, with the features of environment-friendly, high bonding strength, convenient to use. Widely applied in the bonding of leather, textile products, foam, PVC and ABS etc. materials.
Performance Features
Good flexibility
Excellent adhesion and high bonding strength
Excellent resistance to chemical, aging and water
Excellent resistance to high and low temperature
Excellent low temperature fluidity
Technical Indexes |
Appearance: |
Transparent to pale yellow particle |
Hydrolytic Resistance: |
Excellent |
Softening Point: |
About 50℃ |
Melting Temperature: |
>100℃ |
Melt Index: |
>130 |
Adhesive quantity: |
About 10g/m² (Depending on different materials) |
Application Instructions.
1/ This product need to be heated to melt for using (suggest temperature about 170℃), the specific temperature depending on the characteristics of material and foam.
2/ The pipeline that material flows through and adhesive pushing head must be preheated to avoid blocking pipeline.
3/ This product is not suitable for heating in high temperature for a long time, not more than 2 hours in general.
4/ When heating, the material in the heater cannot be completely opened in the air to avoid oxidation. It is better to melt the adhesive by extruding machine.
5/ Airtight heating is not allowed to avoid the internal pressure being too large.
Packing Specifications.
Packed in 25kg(N.W) metal drum.
Storage and Transportation.
This products should be transported in well-sealed packaging and stored in a well ventilated place to avoid sudden hot. (More information please refer to MSDS)